- Blade Width: 8'6", 9'6" & 10'6"
- Fits: Truck Class 2 - 7 & Tractors
- Moldboard: Stainless or Powder-Coated Steel
DO IT ONCE.
DO IT RIGHT.
When winter gets tough, get even tougher with the FISHER® XV2™ v-plow. Built to power through any storm, the FISHER XV2 v-plow comes equipped with extreme flared wings—up to 45″—and double-acting cylinders to easily handle anything thrown in its path. Plus, it’s qualified for vehicles up to Class 6, so it’s as versatile as it is hardworking.
Unique Features
Showing 6 out of 8
Plow Blade Construction
The XV2 v-plow features extreme flared wings that soar from a 35″ center height up to 45″ at the outer edge on 10′ 6″ models. The XV2 v-plow is available in premium, corrosion-resistant stainless steel and powder coated steel in 8′ 6″, 9′ 6″ and 10′ 6″ widths.
The blade comes standard with a 6″, high carbon steel cutting edge, providing increased wear resistance and a clean scrape. An aggressive, 70-degree attack angle enhances scraping and back dragging, making it ideal for asphalt and paved surfaces, and for scraping up ice and hard-packed snow.
10’6″ model has thicker moldboards and a more robust base angle with additional hinge points.
Structural Reinforcement
The XV2 v-plow features our exclusive x-bracing design which is constructed from four vertical ribs and eight x-bracing ribs. Both the ribs and the boxed steel tube reinforce the blade for structural integrity and exceptional torsional strength. A 1 ¼”-diameter, heat-treated steel center pin resides within a three-connection-point hinge for added strength and rigidity.
The 10’6″ model has a heavy-duty T-Frame that features solid, one-piece construction from front to back and an oscillating pivot bar.
*9′ 6″ model shown
Double-Acting Cylinders
InstaLock double-acting cylinders allow the operator to lock the wings together to use the v-plow in straight blade mode with single button control. Double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.
Flared Wings
Reduce the amount of snow that rolls off the top of the plow with standard flared wings that rise 6″-10″ from the center pin. The flared-wing design can aggressively cast snow further while windrowing, making it the ultimate windrowing machine.
Tractor Compatible Mount
Designed for easy installation onto a wide range of tractor models, these mount kits make it possible for the XV2 v-plows to fit on a compact tractor. They are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier. The push beam, which makes up the front portion of the mount, can be quickly detached to allow for a loader attachment.
Learn More
Blade Angle Stops (Standard for 10'6" Model)
The 10′ 6″ model comes standard with blade angle stops, made of reinforced 3/16″ high-strength steel tube. The blade stops reduce stress and wear on the blade.
Curb Guards (Standard for 10'6" Model)
The 10’6″ model has standard curb guards, constructed of abrasion-resistant material and designed to fit tight to the blade. The curb guards protect the outer edge of the plow from wear when plowing along sidewalks and curbs.
Center Snow Control
For exceptional snow containment in all positions, the XV2™ v-plow has a center deflector designed to prevent snow from going over the top of the blade and the formed cutting edges reduce trailing snow.
Standard Features
Showing 3 out of 11
INTENSIFIRE™ Snow Plow Headlights
Available in both LED and Dual-Halogen models, INTENSIFIRE™ plow headlights are engineered and tested for maximum light output, performance, and durability to keep you ahead of the next storm.
LED Headlights
Dual-Halogen Headlights
Minute Mount® 2 Snow Plow Mounting System
The FISHER Minute Mount® 2 system has been engineered for superior safety, durability, and convenience. The mechanical nature of its design means that there are no sensitive electronics that could fail and prevent you from attaching or removing your plow.
Watch Video
Trip-Edge Protection
Each v-plow blade features independent trip-edge protection to get over bumps and hidden obstacles, whether in V, scoop, or straight-blade configuration, helping to protect the plow, the truck and the operator. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.
The FISHER® trip-edge uses compression-type springs that never require adjustment and will not wear out like extension springs.
Watch Video
Reliable Hydraulics
We design and manufacture our own hydraulics to ensure the highest standards of performance, quality, and durability—giving you a plow that is fast, responsive, and built to last. This allows plow drivers to change the blade position quickly and easily for efficient plowing. All critical hydraulic components are fully enclosed for protection from the elements.
Watch Video
Chain Lift Design
The FISHER® chain lift design offers a wide range of performance and reliability advantages over a direct lift system.
Watch Video
FLEET FLEX Electrical System
The FLEET FLEX Electrical System minimizes intrusion to your vehicle during installation and also provide simple, reliable connections between your vehicle and plow. It's completely universal to all current FISHER snowplows so that plow fleets are able to optimize their operations and use any plow on any vehicle for true fleet interchangeability.
Learn More
Universal Plow Control Options
Choose between the ergonomic Fish-Stik® hand-held control or the dash-mounted joystick control. Both feature automatic shutoff, backlit buttons for night operation, and LED lights which indicate "power" and "float" mode. Additional features include programmable "soft-stop", "one-touch" float, build in SECURITY GUARD™ anti-theft system and a plug-in connector for easy removal.Both controls have a plug-in connector for easy removal.
SECURITY GUARD™ Anti-Theft System
The exclusive SECURITY GUARD anti-theft system is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck.
Watch Video
STORM GUARD™ Baked-On Powder Coat
The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows.
Watch Video
Isolation Module
An underhood module transfers lights from vehicle to plow automatically and improves system reliability by using plug 'n play, sealed electrical connections that comply with OEM requirements. Isolating the plow's electrical system from the vehicle's prevents the potential of electrical system damage in the event of a shorted circuit.
Pre-Punched Blades for Accessories
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.
Featured Accessories
WING EXTENSIONS
Expand the carrying capacity of your XV2™ snow plow by adding a pair of genuine FISHER® extension wings. These extension wings feature durable poly cutting edges which also function as a trip mechanism in the event that an obstruction is encountered, the kit also includes a pair of blade stops for increased confidence while moving massive amounts of snow. Wings extend at a 60° angle, increasing the effective plowing width by 21″.
* Not available for 10′ 6″ blades.
* Cannot use Wing Extensions and Curb Guards simultaneously.
Part Number
43510-1
For 8' 6" & 9' 6" Models
SHOE KIT
Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER® shoes are made of cast iron for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation.
* Cannot use Shoe Kit and Back Drag Edge simultaneously.
Part Number
#50700
For All Models
10" RUBBER DEFLECTOR
Dress up your blade and improve functionality with a genuine FISHER® rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.
Part Number
#41812-1
For 8' 6" & 9' 6" Models
#86872
For 10' 6" Models
View All Accessories
Product Specifications
Metric
| Models | 8'6" | 9'6" | 10'6" |
|---|---|---|---|
| Moldboard Options | Stainless or Powder-Coated Steel | Stainless or Powder-Coated Steel | Stainless or Powder-Coated Steel |
| Moldboard Options | Stainless or Powder-Coated Steel | Stainless or Powder-Coated Steel | Stainless or Powder-Coated Steel |
| Blade Type | V-Plow | V-Plow | V-Plow |
| Blade Type | V-Plow | V-Plow | V-Plow |
| Vehicle Compatibility | Truck Class 2 - 6 (under 26,000 lb GVWR) & Tractors | Truck Class 2 - 6 (under 26,000 lb GVWR) & Tractors | Truck Class 2 - 7 (under 27,500 lb GVWR) & Tractors |
| Vehicle Compatibility | Truck Class 2 - 6 (under 26,000 lb GVWR) & Tractors | Truck Class 2 - 6 (under 26,000 lb GVWR) & Tractors | Truck Class 2 - 7 (under 27,500 lb GVWR) & Tractors |
| Approx. Weight* (Without Mount) | 972 lbs | 1,059 lbs | 1,322 lb |
| Approx. Weight* (Without Mount) | 440 kg | 480 kg | 599 kg |
| Plowing Width | Full Angle: 7' 5" Scoop: 7' 2" Full V: 7' 8" | Full Angle: 8' 6" Scoop: 8' 2" Full V: 8' 7" | Full Angle: 9' 9" Scoop: 9' 7" Full V: 9' 11" |
| Plowing Width | Full Angle: 2.26 m Scoop: 2.18 m Full V: 2.34 m | Full Angle: 2.59 m Scoop: 2.49 m Full V: 2.62 m | Full Angle: 2.97 m Scoop: 2.92 m Full V: 3.02 m |
| Blade Width | 8'6" | 9'6" | 10'6" |
| Blade Width | 2.59 m | 2.90 m | 3.20 m |
| Blade Height | At Center: 31" At End: 38" | At Center: 31" At End: 39" | At Center: 35" At End: 45" |
| Blade Height | At Center: 78.74 cm At End: 96.52 cm | At Center: 78.74 cm At End: 99.06 cm | At Center: 88.90 cm At End: 114.30 cm |
| Blade Thickness | 14 ga | 14 ga | Powder-Coated: 11 ga Stainless Steel: 12 ga |
| Blade Thickness | 14 ga | 14 ga | Powder-Coated: 11 ga Stainless Steel: 12 ga |
| Trip Springs | 4 | 6 | 6 |
| Trip Springs | 4 | 6 | 6 |
| Ribs | 12 | 12 | 12 |
| Ribs | 12 | 12 | 12 |
| Lift Cylinder | 1¾" x 10" | 1¾" x 10" | 1¾" x 10" |
| Lift Cylinder | 4.45 cm x 25.40 cm | 4.45 cm x 25.40 cm | 4.45 cm x 25.40 cm |
| Angling Rams | 1¾" x 11" | 1¾" x 11" | 2" x 11" |
| Angling Rams | 4.45 cm x 27.94 cm | 4.45 cm x 27.94 cm | 5.08 cm x 27.94 cm |
| Cutting Edge | ⅜" x 6" (Standard) | ½" x 6" (Standard) | ½" x 6" (Standard) |
| Cutting Edge | 0.95 cm x 15.24 cm (Standard) | 1.27 cm x 15.24 cm (Standard) | 1.27 cm x 15.24 cm (Standard) |
| Mount Type | Minute Mount® 2 | Minute Mount® 2 | Minute Mount® 2 |
| Mount Type | Minute Mount® 2 | Minute Mount® 2 | Minute Mount® 2 |
* Does not include vehicle mount (approx. 60 lbs for v-plows). Please refer to eMatch for specific vehicle applications.
Compare Products
Product Literature
eMatch
Does this plow fit my vehicle?
Use eMatch & enter your vehicle’s specifications to easily identify which Fisher snow plows will fit your vehicle.
Get Started
XV2™ Photo Gallery
View Full Gallery
XV2™ Video Gallery
View Full Gallery
